Siemens SIKOSTART 3RW34, Инструкция по эксплуатации

Страница: 31 / 48

Siemens Energy & Automation, Inc. 31
7 7 E Elle ec cttrriic ca all S Sp pe ec ciiffiic ca attiio on ns s
Main Voltage Required (± 15%) In Line Application: 200/460V AC or 400/600V AC
(specified by catalog no.)
Inside Delta Application: 200/400V AC or
400/600V AC (specified by catalog no.)
Control Voltage Required 24V DC, 120V AC, or 230V AC, +10%, -15%
(specified by catalog no.)
Control power requirements are listed below.
AC Frequency & Phase 50/60 Hz, working 45 to 65 Hz; 3 phase
Temperature Range 0 v to 50 v C (32 v to 122 v F), inside enclosure in which unit is
mounted. Derate 33% for each 10
v
C over 50
v
C to a max-
imum of 70
v
C.
Permissible Altitude 1000m at rated output
2000m at 0.87*le
3000m at 0.77*le
Overcurrent Protection The standard SIKOSTART controller is not equipped with
overload protection.
The user must provide overload
protection.
Ratings for Frequent Starts and Occasional - 20 times in any 60 minute period:
Stops, Plugging or Jogging Applications Controller rating to be 133% of motor rating.
Severe - 5 times in any 60 second period:
Controller rating to be 200% of motor rating.
Very Severe - 10 times in any 60 second period:
Controller rating to be 300% of motor rating.
Controller Current Ratings
During Start and Run:
Current Cold Start Time @ 50
vv
C
115% Continuous
200% 480 sec.
300% 120 sec.
450% 30 sec.
500% 20 sec.
600% 10 sec.
Adjustment Ranges -
16 settings each:
Start Time (Accel Ramp)
.5 to 60 seconds*
Stop Time (Decel Ramp) .5 to 60 seconds
Initial Voltage 30% to 80% of nominal voltage (approximately 10% to 64% on
normal starting torque)
*Acceleration time of the motor will probably be less than the
Start Time setting and will vary depending on the load friction
and inertia characteristics of the system.
Input (RUN) Coil
Coil Voltage 120VAC 24VDC 230VAC
Isolation Voltage, VAC 1500 1500 1500
Input Current, ma 10@120VAC 10@24VDC 10@230VAC
On Voltage, volts min. 85 VAC 17 VDC 170 VAC
On Current, ma min. 6ma 6ma 6ma
Off Voltage, volts max. 40VAC 8VDC 80VAC
Off Current, ma max. 3ma 3ma 3ma
Input Impedance,
ohms (typical)
13k 13k 13k