Siemens SENTRON PAC4200 Скачать руководство пользователя страница 99

Страница: 99 / 252

Operator control

8.1 Device interface

SENTRON PAC4200
Manual, 09/2008, A5E02316180B-01

Navigation through the views

Navigation through the measured variables, menus and device settings is assigned

throughout to the function keys F1 and F4:
●

: Cancels the last operator action. Returns from display of the device settings to

display of the menu.

●

: Calls the main menu.

●

: Calls the selected menu entry.

●

: Opens edit mode of the device setting.

The figure below shows the navigation paths. The display of the measured variables is the

starting point and end point of the navigation. Repeated pressing of F1 returns you to the

display of the measured variables.
Please note that additional functions are assigned to F4.
F4

: Permanently saves the last set value and returns from edit mode to display mode.

If no editing is intended, the key closes the display and returns to the menu selection.
F4

: Is an ON/OFF switch.

Содержание SENTRON PAC4200





























































































































































































































































Результаты поиска

Содержание SENTRON PAC4200

Отзывы:

Siemens SENTRON PAC4200, Руководство пользователя, Страница: 99 / 252

Результаты поиска

Содержание SENTRON PAC4200

Отзывы: