Siemens SENTRON PAC4200 Скачать руководство пользователя страница 127

Страница: 127 / 252

Parameterizing

9.2 Parameterizing the operator interface

SENTRON PAC4200
Manual, 09/2008, A5E02316180B-01

127

AUTO US

Time change within the USA
Changeover to daylight saving time: The

internal clock is put forward from 2 a.m.

local time to 3 a.m. on the second

Sunday in March.
Changeover to standard time: The

internal clock is put back from 2 a.m.

local time to 1 a.m. on the first Sunday in

November.

TABLE

Time change can be individually

parameterized. The parameters can be

set in the software.

Default value: AUTO EU

9.2.7

Integrated I/Os

Device settings for using the digital inputs and outputs.
Call: "SETTINGS > INTEGRATED I/O".

DIGITAL OUTPUT

Figure 9-6

"DIGITAL OUTPUT" device settings

DIG.OUTPUT

Digital output

Range:

0.0

Digital output DO0 (terminal labeling)

0.1

Digital output DO1 (terminal labeling)

Default value: 0.0

ACTION

Method of using the digital output:

Range:

OFF

The digital output is switched off.

DEVICE ON

The digital output is switched on.

REMOTE OUTPUT

The digital output is controlled by remote

access, e.g. SEAbus, SEAbus TCP,

PROFIBUS DP, Modbus RTU,

Modbus TCP.

Содержание SENTRON PAC4200





























































































































































































































































Результаты поиска

Содержание SENTRON PAC4200

Отзывы:

Siemens SENTRON PAC4200, Руководство пользователя, Страница: 127 / 252

Результаты поиска

Содержание SENTRON PAC4200

Отзывы: