manualshive.com logo in svg

Siemens SENTRON PAC4200, Руководство пользователя, Страница: 147 / 252

Поделиться
Скачать
Siemens SENTRON PAC4200 Скачать руководство пользователя страница 147

 

SENTRON PAC4200 
Manual, 09/2008, A5E02316180B-01 

147

 

Service and maintenance 

10

10.1

 

Calibration 

The device has been calibrated by the manufacturer before shipping. Recalibration is not 

required provided the environmental conditions are maintained. 

10.2

 

Cleaning 

Clean the display and the keypad periodically. Use a dry cloth for this. 

 

CAUTION 

 

Damage due to detergents 
Detergents can damage the device. Do not use detergents. 

 

10.3

 

Firmware updates 

SENTRON PAC4200 supports firmware updates. 
Use the SENTRON powerconfig software, Version V2.0 or higher, to install all updates. For 

update instructions, please see the related documentation. 
The update function is password protected. 

10.4

 

Replacing the battery 

The battery of the SENTRON PAC4200 must be periodically replaced.   

 

 

Note 
No battery indicator 
The SENTRON PAC4200 has no function for determining the charging status of the battery.

 

Service life of the battery 

Refer to the information about the service life of the battery in the chapter "Technical 

specifications". 

Содержание SENTRON PAC4200





























































































































































































































































Отзывы:

Нет отзывов