Siemens SENTRON 3WL10 Скачать руководство пользователя страница 26

Страница: 26 / 234

Description

2.3 Basic unit

Air circuit breaker 3WL10

Manual, 11/2017, L1V30499596002-01

Racking the circuit breaker

The circuit breaker is racked in and out of the guide frame using a racking handle.

When the racking handle is not in use, it can be stowed in the right-hand side wall of the

guide frame.

Circuit breaker positions in the guide frame

Using the racking handle, the circuit breaker can be put in three different positions in the

guide frame:

●

CONNECT:

The air circuit breaker is connected to the main circuit. The auxiliary circuits are also

closed.

●

TEST:

In the TEST position, the main contacts of the air circuit breaker are not connected to the

main circuit, but only to the auxiliary circuit.

In this position, the functionality of the auxiliary circuit and all of its components (auxiliary

switches, auxiliary releases, communication, etc.) can be tested while the main circuit is

open.

●

DISCON:

The circuit breaker is not connected to the main circuit nor to the auxiliary circuit. In the

DISCON (DISCONNECT) position, it can be removed from the guide frame.

The circuit breaker position is indicated below the hole for inserting the racking handle.
When the circuit breaker arrives at one of the positions during racking, it engages in this

position. Further racking is then only possible once the pushbutton for unlocking racking

(Push before Operating) has been pressed.

Содержание SENTRON 3WL10











































































































































































































































Результаты поиска

Содержание SENTRON 3WL10

Отзывы:

Похожие инструкции для SENTRON 3WL10

Бренды по названию

Популярные бренды

Siemens SENTRON 3WL10, Руководство пользователя

Результаты поиска

Содержание SENTRON 3WL10

Отзывы:

Похожие инструкции для SENTRON 3WL10

Бренды по названию

Популярные бренды