Communication Ports
4.4 SFP Transceivers
2
1
1
Tx Connector
2
Rx Connector
Figure 4.7
SC Port
2
1
1
Tx Connector
2
Rx Connector
Figure 4.8
ST Port
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications (Page 33)"
4.4
SFP Transceivers
The RUGGEDCOM RSG2300P supports up to two Small Form-Factor Pluggable (SFP)
transceiver sockets, which are compatible with a wide array of SFP transceivers
available from Siemens.
LEDs
Each socket features an LED that indicates its link state.
State
Description
Yellow (Solid)
Link established
Yellow (Blinking)
Activity
Off
No link detected
Compatible SFP Transceivers
For more information about which SFP transceivers are compatible with the
RUGGEDCOM RSG2300P, as well as instructions for ordering and installation/
removal, refer to the "
RUGGEDCOM SFP Transceiver Catalog [https://
support.industry.siemens.com/cs/ca/en/view/109482309]
".
IMPORTANT
Only use SFP transceivers approved by Siemens for RUGGEDCOM products. Siemens
accepts no liability as a result of performance issues related in whole or in part to
third-party components.
4.5
GBIC Optic Ethernet Ports
GBIC (Gigabit Interface Converter) optic Ethernet ports are available with SC
(Standard or Subscriber Connector) connectors.
RUGGEDCOM RSG2300P
Installation Manual, 04/2022, C79000-G8976-1047-18
27