Siemens RUGGEDCOM RSG2300P, Руководство по установке

Страница: 35 / 54

Communication Ports
4.3 Fiber Optic Ethernet Ports
State Description
Yellow (Solid) Link established
Yellow (Blinking) Transmitting/receiving
Off No link detected
Pin-Out
The pin-out for the PoE ports is as follows:
1 8
Figure 4.4 RJ45 Ethernet Port PoE Pin
Configuration
Pin Description
1 RX + and Power -
2 RX - and Power -
3 TX + and Power +
4 Reserved (Do
Not Connect)
5 Reserved (Do
Not Connect)
6 TX - and Power +
7 Reserved (Do
Not Connect)
8 Reserved (Do
Not Connect)
Specifications
For specifications on the available PoE ports, refer to "PoE Power Supply
Specifications (Page 31)" .
4.3 Fiber Optic Ethernet Ports
Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer
Registered Jack), LC (Lucent Connector), SC (Standard or Subscriber Connector) or ST
(Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections
of each port are properly connected and matched to establish a proper link.
2 1
1
Tx Connector
2
Rx Connector
Figure 4.5 MTRJ Port
2 1
1
Tx Connector
2
Rx Connector
Figure 4.6 LC Port
26
RUGGEDCOM RSG2300P
Installation Manual, 04/2022, C79000-G8976-1047-18