For internal use only
27 / 88
Siemens
KNX bus communications
CE1P3127en
Building Technologies
Commissioning notes
2013-04-08
Plant operation
Preselection: Off
State: Off
Cause: Plant op selector
Select "Off" on the "Preselection" line and acknowledge by pressing the OK knob.
Press ESC to return to the "Main menu" page.
Main menu
Commissioning...
Time switch...
Room operating mode...
Plant operation...
Select "Commissioning" and press the knob.
Before the "Commissioning" page is displayed, the following warning appears:
Caution!
Plant stops
ESC
OK
Acknowledge the display
OK
by pressing the knob (the plant stops). The
"Commissioning" page now appears.
Commissioning
Basic configuration...
Extra configuration...
Settings...
Communication...
Select the "Communication" line for example by rotating the knob, and press the
knob to open the "Communication" page.
Main menu > Commissioning > Communication
Communication
Basic settings...
Room...
Holidays/special days...
Distribution zones...
Press the knob to access the "Basic settings" page
Plant operation = Off
Action
Return to main menu
Action
Plant stops
Action
Action
Communication
Action