Siemens Prisma 3T Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 55

Siemens Prisma 3T Скачать руководство пользователя страница 37

Revision Date: 3/13/2019

33

Resonance Technology Tech Remote (Talk Box) Setup

Volume Settings

1.

Hearing sensitivity varies so always check with your participant to make sure you are
using the appropriate volume level - start at a level of 50 and adjust up or down from
as needed

2.

Patient Volume (wheel #1): Changes the volume in the participant’s headphones -
what the participant hears task or movie computer

3.

Patient Mic (wheel #2): Changes the volume of the participant’s voice – what the
operator hears when the participant talks

4.

Main Volume (wheel #3): Changes the volume of the control room speaker which
outputs sound from the operator’s computer (i.e. tasks, music or movie) – so you can
hear what the participant hears

5.

To change the operator’s volume - what the participant hears from the researcher –
hold down the talk button and scroll wheel #1

Audio Input

1.

Should be set on “Audio-1”

2.

Click “Menu” then scroll to “Audio Input”

3.

If you are plugging in an external audio device to the interface speaker (i.e. ipod) you
must change to "Audio-2"

Comm. Mode settings

1.

Click “Menu” then scroll to “Comm. Mode”

2.

The "manual" setting automatically turns off the sound coming from the participant's mic
after a few seconds

3.

The "auto" setting will have constant sound coming from the mic – (i.e. you will be able
to hear scanner noise - not ideal to use this setting while scanning)

«
...
35
36
37
38
39
...
»

Содержание Prisma 3T
























































Отзывы:

Нет отзывов