Siemens MJ-XL Скачать руководство пользователя страница 19

Страница: 19 / 86

Viewing and Changing MJ-XL Data Items

Siemens Power Transmission & Distribution, Inc.

Changing Alpha or Numeric Settings

The process of changing alpha or numeric settings is simi-

lar to that of changing configuration parameters, except

that there are more choices because there may be multi-

ple characters to change, and each character may range in

value from 0 to 9, and/or A-Z.

Example

Suppose you want to change the regulator Forward Volts

setpoint from 123.0 volts to 122.5 volts. Setpoints are con-

tained in the <

REGULATOR

> Menu, so you need to view

that Menu.

Press the Menu key twice to return the display to the

METER

> Menu.

Press the

key repeatedly until

<REGULATOR>

viewed.

Press the

key until

FwdVolts: 123.0

appears.

Press the Change key to activate Change mode. (The

flashing digit indicates the digit to be changed.)

Fwd-

Volts: 123.0

appears. Note: the underscore in this

section of the manual (in this case under the 0)

denotes flashing.

Press the

key five times to increment the digit from

0 to 5.

Press the

key to step left one digit.

FwdVolts:

123.5

appears. The digit 3 is flashing to indicate that it

can be changed.

Press the

key to decrement the digit from 3 to 2.

Press the Save key to make the change take effect.

FwdVolts: 122.5

appears. The flashing stops to indi-

cate that the change is complete.

3.5

Using the Fast-Path Keys to View/

Change Data Items

Fast-path keys are the labeled keys on the middle portion

of the MJ-X

Control Panel, such as the Voltage Level key.

Use the Fast-path keys as a shortcut to certain frequently-

used data items. Simply press the fast-path key and the

desired data item appears immediately.

After viewing an item with a fast-path key, the change pro-

cedure is the same as the one just described. In the above

example, the Voltage Level fast-path key would replace

steps 1-3 and save a number of key strokes.

Содержание MJ-XL























































































Результаты поиска

Содержание MJ-XL

Отзывы:

Похожие инструкции для MJ-XL

Бренды по названию

Популярные бренды

Siemens MJ-XL, Инструкция по установке и эксплуатации

Результаты поиска

Содержание MJ-XL

Отзывы:

Похожие инструкции для MJ-XL

Бренды по названию

Популярные бренды