Siemens MCC-3298 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 52

background image

The use of unauthorized parts in the repair of the equipment or tampering by
unqualified personnel will result in dangerous conditions which will cause severe
personal injury or equipment damage. Follow all safety instructions contained
herein.

IMPORTANT

The information contained herein is general in nature and not intended for specific
application purposes. It does not relieve the user of responsibility to use sound
practices in application, installation, operation, and maintenance of the equip-
ment purchased. Siemens reserves the right to make changes in the specifica-
tions shown herein or to make improvements at any time without notice or
obligations. Should a conflict arise between the general information contained in
this publication and the contents of drawings or supplementary material or both,
the latter shall take precedence.

QUALIFIED PERSON

For the purpose of this manual a qualified person is one who is familiar with the
installation, construction or operation of the equipment and the hazards involved.
In addition, he has the following qualifications:
(a)

is trained and authorized

to de-energize, clear, ground, and tag circuits

and equipment in accordance with established safety practices.

(b)

is trained

in the proper care and use of protective equipment such as

rubber gloves, hard hat, safety glasses or face shields, flash clothing, etc.,
in accordance with established safety practices.

(c)

is trained

in rendering first aid.

SUMMARY

These instructions do not purport to cover all details or variations in equipment, nor to provide for every possible contingency
to be met in connection with installation, operation, or maintenance. Should further information be desired or should
particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should be referred to
the local sales office.

The contents of this instruction manual shall not become part of or modify any prior or existing agreement, commitment
or relationship. The sales contract contains the entire obligation of Siemens Energy & Automation, Inc. The warranty
contained in the contract between the parties is the sole warranty of Siemens Energy & Automation, Inc. Any statements
contained herein do not create new warranties or modify the existing warranty.

«
1
2
3
4
...
»

Содержание MCC-3298





















































Отзывы:

Нет отзывов

Похожие инструкции для MCC-3298

Бренд: Rain Bird Страницы: 48

Бренд: IBM Страницы: 144

VLT AQUA Drive FC 202

Бренд: Danfoss Страницы: 124

Бренд: Danfoss Страницы: 2

Бренд: Danfoss Страницы: 8

Бренд: Danfoss Страницы: 114

ECL Comfort 300

Бренд: Danfoss Страницы: 2

Бренд: Danfoss Страницы: 16

Бренд: Danfoss Страницы: 24

Бренд: Danfoss Страницы: 8

ECL Comfort 296

Бренд: Danfoss Страницы: 159

VLT AutomationDrive FC 301

Бренд: Danfoss Страницы: 78

Бренд: Danfoss Страницы: 20

ECL Comfort 210

Бренд: Danfoss Страницы: 12

ECL Comfort 110

Бренд: Danfoss Страницы: 8

ECL Comfort 100M

Бренд: Danfoss Страницы: 21

Бренд: Danfoss Страницы: 16

Бренд: Danfoss Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды