Siemens LDS 6 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 102

Siemens LDS 6 Скачать руководство пользователя страница 15

Technical Information

2.2 Design

LDS 6
Operating Instructions, 01/2009, A5E00295894-05

15

Inputs and outputs

● One to three measurement channels with hybrid connections for the sensors at the

measuring points

● Two analog inputs per channel for process gas temperature and pressure
● Two analog outputs per channel for gas concentration(s) or for gas temperature and

concentration For selected versions, the transmission can be read out as an alternative.

● Six freely configurable binary inputs per channel for signalling faults or maintenance

requests from external temperature or pressure transducers or sensor purging failure.

● Six freely configurable binary outputs per channel (signalling of faults, maintenance

requirements, function control, transmission limit alarms, concentration limit alarms, store

analog output)

Communication

Network connection: Ethernet (10Base-T) for remote diagnostics and maintenance.
The LDS 6 can be operated remotely via the Ethernet port with a PC running

Windows 95/98/ME or Windows NT/2000/XP. It is also possible to connect the LDS 6 via

modem to the public telephone net. In that case an LDS 6 LAN modem kit is required. Any

external connection requires the optional software LDSComm (LDS Communication Client)

to be installed on the remote computer. All aspects of LDS 6 can be controlled in this way.

For the operation of the LDS 6 using LDSComm software refer to the LDSComm Manual

(A5E02183317).

Maintenance and fault messages

LDS 6 outputs different warnings via relays:
● Need for maintenance (measured value is not influenced)
● Operating error (measured value might be influenced)

«
...
13
14
15
16
17
...
»

Содержание LDS 6







































































































Отзывы:

Нет отзывов