manualshive.com logo in svg

Siemens i-3, Руководство пользователя, Страница: 8 / 80

Поделиться
Скачать
Siemens i-3 Скачать руководство пользователя страница 8

 

6

Three-way switch (Figure 2.6)

This switch is used to determine the 
method operation of all SIPODs. It has 3 
positions, “All ON”, “Auto” and “All OFF.”

 •

 “All ON” – Forces all SIPOD contacts to  

  be closed. In this position, the I/O Board  
  prevent SIPODs from accepting any 
 remote 

commands.

 

•

 “Auto” – SIPODs can be controlled

  remotely by a Building Automation 
  System (BAS) or any Modbus master.

 

• 

“All OFF” – Forces all SIPOD contacts   

  to be opened. In this position, the I/O  
  Board prevents SIPODs from accepting  
  any remote commands. 

RS-485 terminals

The RS-485 terminals are used to connect
i-3 V2  I/O Controller to a Modbus  Building 
Automation System (BAS). They also 
enable users to configure the i-3 V2 I/O 
Controller and perform various diagnostic 
tests with the configuration software. 

Reset button

This button resets (reboots) the controller.

Chapter 2

i-3 V2 I/O Controller

Figure 2.5

Modbus board

Figure 2.6

Three-way Switch

Reset button

Three way switch
All ON-AUTO-ALL OFF

Modbus 
RS-485
connection

All ON

Auto

All OFF

Содержание i-3

















































































Отзывы:

Нет отзывов