Siemens HiPath C10 Скачать руководство пользователя страница 248

Страница: 248 / 300

Performing system maintenance

A31003-W1040-U101-1-7619, July 2006 DRAFT

248

HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide

hwc_ongoing.fm

Performing system maintenance tasks

To set a poll interval:

From the main menu, click

Wireless Controller Configuration

. The

Wireless Controller

Configuration

screen appears.

From the left pane, click

System Maintenance

. The

System Maintenance

screen

appears.

In the

Health Checking

area, in the

Poll Timer

box, type the time interval (in seconds) for

the HiPath Wireless Controller to check that each Wireless AP is connected. The default is

seconds.

Click

Apply

To enable and define parameters for Syslog:

From the main menu, click

Wireless Controller Configuration

. The

Wireless Controller

Configuration

screen appears.

From the left pane, click

System Maintenance

. The

System Maintenance

screen

appears.

In the

Syslog

area, to enable the

Syslog

function for up to three syslog servers, select the

appropriate checkboxes.

For each enabled syslog server, in the

box, type a valid IP address for the server on the

network.

For each enabled syslog server, in the

Port #

box, type a valid port number to connect on.

The default port for syslog is

514

To include all system messages, select the

Include all service messages

checkbox. If the

box is not selected, only component messages (logs and traces) are relayed. This setting
applies all three servers. The additional service messages are:

●

DHCP messages reporting users receiving IP addresses

●

Startup Manager Task messages reporting component startup and failure

To include audit messages, select the

Include audit messages

checkbox.

From the

Application Logs

drop-down list, select the log level (local.0 - local.6) to be sent

to the syslog server. This setting applies all three servers.

If the

Include all service messages

checkbox is selected, the

Service Logs

drop-down

list becomes selectable. Select the log level (local.0 - local.6) to be sent to the syslog
server. This setting applies all three servers.

10. If you selected the

Include audit messages

checkbox, the

Audit Logs

drop-down list

becomes available. Select the log level (local.0 - local.6) to be sent to the syslog server.
This setting applies all three servers.

Содержание HiPath C10













































































































































































































































































































Результаты поиска

Содержание HiPath C10

Отзывы:

Похожие инструкции для HiPath C10

Бренды по названию

Популярные бренды

Siemens HiPath C10, Руководство пользователя

Результаты поиска

Содержание HiPath C10

Отзывы:

Похожие инструкции для HiPath C10

Бренды по названию

Популярные бренды