Siemens Hipath bizip 410 Скачать руководство пользователя страница 76

Страница: 76 / 144

Administering HiPath BizIP time

Changing the date/time manually

If there is no

SNTP

server available, the date and time can also be de-

fined manually. If an SNTP server is configured, manually altered time data
is overwritten by the data from the SNTP server at the next SNTP update.

Data required

•

Today’s date

•

Current time

Administration on the PC

Web

System-wide Settings

Time and Date

Changing the time manually

•

Enter the current time under

Local Time (hh:mm)

•

Enter today’s date under

Date (day, month, year)

•

Select the required format to be displayed in the BizIP 410 directory un-
der

Date Format

Click

Submit

to incorporate your data.

This can also be carried out directly in the user area on the BizIP 410
telephone. For further information, see the Operating Manual.

The details in relation to the

SNTP server IP address

and

Time

zone offset (hours)

are only required if an SNTP server is to be

used and the DHCP server does not supply this data or if there is no
DHCP server active. The DHCP server of the HiPath BizIP supplies
this data.

Содержание Hipath bizip 410

















































































































































Результаты поиска

Содержание Hipath bizip 410

Отзывы:

Siemens Hipath bizip 410, Руководство администратора, Страница: 76 / 144

Результаты поиска

Содержание Hipath bizip 410

Отзывы: