manualshive.com logo in svg

Siemens Hipath bizip 410, Руководство администратора, Страница: 17 / 144

Поделиться
Скачать
Siemens Hipath bizip 410 Скачать руководство пользователя страница 17

Getting started

17

This is the installation sequence for a standard configuration:
1.

Connecting BizIP AD 20 to the telephone network

Use an ISDN cable to connect the BizIP AD 20 ( "ISDN 1" 
port

Æ

Page 10) to the output on the NTBA. You can connect another 

NTBA to the "ISDN 2" port to conduct up to four ISDN calls at the same 
time.

2.

Connecting BizIP AD 20 to the Internet

Use a network cable to connect the BizIP AD 20 ("WAN" port 

Æ

Page 10) to the DSL modem.

3.

Connecting BizIP AD 20 to the LAN

Use a network cable to connect the BizIP AD 20 ("LAN" port 

Æ

Page 10) to a free network port on the switch.

4.

Connecting BizIP AD 20 to the power supply system

Plug the BizIP AD 20 power supply into the power outlet and connect 
it to the "Power" port 

Æ

Page 10 on the BizIP AD 20. Booting is not con-

cluded until the "Power" LED stops flashing. When this LED lights up, 
the BizIP AD 20 is ready for use. For further information on the LED in-
dicators, see 

Æ

Page 132.

5.

Connecting a telephone to the LAN

Use a network cable to connect the switch to a BizIP 410 telephone 
(port 1 

 

Æ

Page 12).

You can also install an BizIP 410 telephone between an existing PC and 
the LAN. For more information, refer to 

Æ

Page 110.

6.

 Connecting the telephone to the power supply system

Plug the power supply unit into the power outlet and connect it to the 
port on the underside of your BizIP 410 telephone (port 

 

Æ

Page 12). A power supply unit must then be used with the tele-

phone if the switch used does not support "Power over Ethernet" (Class 
2 to 6.5W).

While the system is starting up, you can enter the language, the coun-
try and the user name on the telephone.

7.

Connecting additional telephones

Repeat Step 5 and Step 6 for each BizIP 410 telephone you want to 
connect (up to 16 stations).

8.

Connecting additional devices

You can also connect various analog devices to the "a/b" ports on the 
BizIP AD 20 (default: "a/b 1" port: Fax, 
"a/b 2" port: telephone). For more information, refer to 

Æ

Page 115.

Hardware installation is now complete. 
The telephones are configured automatically which means that you will be 
able to make internal calls straight away.
A few more settings are required in order to use the public telephone net-
work (ISDN) and Internet telephony (VoIP) to make external calls 

Æ

Page 18.

Содержание Hipath bizip 410

















































































































































Отзывы:

Нет отзывов