4
■
Leaving the door open when the oven is cooling down The
oven must only be left to cool with the door closed. Even if
the oven door is left only slightly open, the fronts of nearby
kitchen units may be damaged over time.
■
Oven seal: the fibreglass seal around the oven's interior
forms the seal with the glass door. As far as possible, it is
recommended that you do not clean it because it is very
sensitive. Rubbing it might damage it. If the seal is worn, a
new one can be acquired from the Technical Assistance
Service.
■
The oven door as a support surface: Do not rest or sit on the
oven door when it is open. Do not place any cookware or
accessory on the oven door.
■
Transporting the appliance: Do not use the door handle to
move or secure the appliance. The handle cannot take the
weight of the appliance and may break. The glass panel of
the oven door might move, causing misalignment between
the front panel and the glass panel.
■
Grilling: When grilling, do not place the universal deep tray or
the flat oven tray at a height of more than 3. Due to the
extreme heat, it could be deformed and cause damage to the
enamel when it is removed. Use level 4 and 5 only for direct
grilling.
Your new oven
We will now describe your new oven. This chapter explains the
functions of the control panel and its individual elements.
Information is also provided about the oven's accessories and
internal components.
Control panel
Below is a general overview of the control panel. The display
panel cannot show all the symbols at the same time. Elements
may vary according to the model.
Buttons
Knob
Using the knob it is possible to change all the recommended
and configured values. The control knob symbol
Î
shows the
value that can be changed.
The control knob is retractable. The rotary control knob is
retracted and returned by pressing the control.
2Q
2II
6WDUW
6WRS
&NJ
0
3
Use
1
Buttons
2
Display panel
3
Knob
Symbol
Button function
‡
Switching the oven on and off
"
Select the type of heating
X
Select the automatic program
l
Short push = select memory
Long push = store in memory
x
Select the self-cleaning function
0
Open and close the time function menu
‚
Select the temperature and weight
h
Short push = rapid heating
Long push = Childproof lock
±
Short push = check temperature
Long push = open or close the basic settings
menu
†
Short push = begin/pause working
Long push = stop working
Symbol
Button function
Содержание HB76 1 Series
