Siemens HB76 1 Series, Инструкция по эксплуатации

Страница: 10 / 36

10
To cancel a cooking time
Using the button
0
, adjust the cooking time
Nx
. To reset the
cooking time to
‹
:
‹‹
using the control knob. Press the
0
button repeatedly until the control knob symbol
Î
disappears
from the time indicator.
Adjusting the cooking time
Using the
0
button, adjust the cooking time
Nx
. Change the
cooking time using the control knob.Press the
0
button
repeatedly until the control knob
Î
symbol disappears from
the time indicator. The time elapsed of the changed time is
displayed.
Calling up the clock, cooking time and end time
You can call up all the functions with the
0
clock button.
Delaying the end time
The end time can be delayed by:
■
for all types of heating,
■
many programs,
■
self-cleaning.
Example: the dish is put in the oven at 9:30 a.m. 45 minutes of
cooking are required; so, it will be ready at 10:15 a.m.
However, you would like it to be ready at 12:45 p.m.
Change the end cooking time from 10:15 a.m. to 12:45 p.m.
The oven will begin working at 12:00 p.m. and finish working at
12:45 p.m.
This function is also compatible with self-cleaning. Cleaning can
be programmed at night so the oven is available during the
day.
Perishable food should not be left for too long in the oven.
Delaying the end of the cooking time
Prerequisite: a cooking time must have already been
programmed. The oven must not be working.
1.
Using the
0
button, select the end cooking time
Ny
.
The end time will be displayed. The dish will be ready at this
time
2. Change the end time using the control knob.
3. Press the
0
button repeatedly until the control knob
symbol
Î
disappears from the time indicator.
4. Press the
†
button.
The oven is set to standby. The
†
button lights up. The set
time is displayed in the time indicator. When the oven starts
working, the time elapsed is displayed.
The cooking time has elapsed
A signal sounds. The oven stops heating.
‹
:
‹‹
is shown on the
clock display. You can stop the audible signal by pressing
the
0
button.
Correcting the end time
This is only possible as long as the oven is in standby. Use
the
0
button to select the
Ny
end time. Adjust the end time
using the rotary selector. Press the
0
button repeatedly until
the
Î
rotary symbol disappears from the clock display. The
new end time is applied.
Setting the clock
The oven must be switched off before you can set or change
the clock.
Following a power cut
After a power cut the display panel shows
‹
:
‹‹
and the
symbol
0
. Set the current time.
1. Press the
0
button.
The arrow is in front of the hour symbol
N 0
.
‚ƒ
:
‹‹
is shown
on the display panel.
2.
Set the current time using the control knob.
3. Press the
0
button.
The menu closes. The actual time is displayed on the display
panel.
Changing the clock
If you wish to change the time from summer to winter time, for
example, press the
0
button twice. The arrow is next to
the
N 0
symbol for the clock. Then proceed as described in
points 2 and 3.
Hiding the clock
You can hide the clock. Then it will only appear when the oven
is switched on. For more information, refer to the
Basic settings
section.
RQ
RII VWDUW
VWRS
ƒ&NJ
0 3
VWDUW
VWRS
ƒ&NJ