8
Recommended settings
If you choose a dish from the recommended settings, the ideal
setting values are already specified. You can choose from
many different categories. You will find recommended settings
for a large number of dishes – from cake, bread, poultry, meat
and game through to bakes and pre-prepared products. You
can change the temperature and cooking time. The type of
heating is fixed.
You can access the various dishes by navigating through
several selection levels. Try it out and see the range of dishes
for yourself.
Selecting a dish
1.
Press the
"
button.
:
3D hot air, 160 °C are suggested in the display.
2.
Turn the rotary selector anticlockwise to
j
Recommended
settings.
3.
Move to the first food category with the
¿
button and select
the required category with the rotary selector.
Move to the next level with the
¿
button. Turn the rotary
selector to make the next selection. The setting for the
selected dish now appears.
4.
Press the
†
button.
Appliance operation begins. You can see the suggested
x
cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
x
0:00. You can cancel the signal early by pressing the
0
button.
Changing the temperature or grill setting
Turn the rotary selector to change the temperature or grill
setting.
Changing the cooking time
Press the
0
button and move to the cooking time with the
¿
button. Change the cooking time using the rotary selector.
Press the
0
button.
Calling up information
Press the
±
button briefly. For any information, press the
±
button again briefly.
Setting a later end time
See the section entitled
Time-setting options
, Setting a later end
time.
Setting rapid heating
Rapid heating is not suitable for all types of heating.
Suitable types of heating
■
%
Top/bottom heating
■
'
HydroBaking
■
&
Intensive heat
■
3
Hot air
■
:
3D hot air
Suitable temperatures
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.
Setting rapid heating
Condition: a suitable type of heating and temperature must
have been set.
Press the
c
button to activate rapid heating. The
c
symbol
is displayed in the status bar. The temperature indicator bars
start filling in.
Rapid heating ends when all the bars are filled. You will hear a
short signal. The
c
symbol goes out. Place your food in the
cooking compartment.
Cancelling rapid heating
Press the
c
button. The symbol goes out.
Notes
■
Rapid heating is cancelled if you change the type of heating.
■
You can use the
±
button to check the current cooking
compartment temperature during rapid heating.
■
If a cooking time has been set, this runs independently of
rapid heating and counts down immediately when operation
is started.
■
To ensure an even cooking result, do not place your food in
the cooking compartment until rapid heating is complete.
Memory
Memory gives you the option to store your own settings and
call them up again at the press of a button. There are six
memory locations available. The memory function is useful for
recipes which you prepare particularly frequently.
Storing settings in the memory
1.
Set the required operating mode. Do not start.
2.
Briefly press the
l
button and use the rotary selector to
select the memory location.
3.
Press and hold the
l
button until "Memory saved" is
displayed.
The setting is saved and can be started at any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Starting the memory
You can start cooking at any time using the settings saved for
your dish.
1.
Press the
l
button briefly.
The saved settings are displayed. If "Memory location empty"
appears, no settings have been saved. You cannot start the
memory. Save the required setting first, as described under
Saving in the memory
.
2.
Press the
†
button.
The memory setting starts.
Changing the memory location
Once operation has started, you can no longer change the
memory location.
Changing the settings
This can be done at any time. The setting you originally saved
appears the next time you start the memory.
