Work Safety Information
6
Siemens Building Technologies
Fire Safety & Security Products
01.2006
2
Work Safety Information
Caution and Warning
CAUTION !!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
To reduce the risk of electric shock, do not
remove cover (or back).
No internal parts can be serviced by users.
Refer servicing to qualified personnel
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS MONITOR
TO RAIN OR MOISTURE.
“HIGH VOLTAGE EXISTS ON THE BACK LIGHT POWER LEAD OF THIS
MONITOR. BEFORE SERVICING, DETERMINE THE PRESENCE OF HIGH
VOLTAGE BY CONNECTING THE H.V. METER BETWEEN THE BACK LIGHT
POWER LEAD AND CHASSIS ONLY“
2.1
Product Safety Precautions
Follow all warnings and instructions marked on the product.
1.
Do not use this product near water.
2.
This display should be installed on a stable horizontal base.
3.
When cleaning, use only a neutral detergent cleaner with a soft damp cloth.
Do not spray with liquid or aerosol cleaners.
4.
Do not expose this monitor to direct sunlight or heat. Hot air may cause
damage to the cabinet and other parts.
5.
Adequate ventilation must be maintained to ensure reliable and continued
operation and to protect the monitor from overheating. Do not block ventilation
slots and openings with objects or install the monitor in a place where
ventilation may be obstructed.
6.
Do not install this monitor near a motor or transformer where strong
magnetism is generated. Images on the monitor will be distorted and the color
irregular.
7.
Do not allow metal pieces or objects of any kind fall into the monitor through
ventilation holes.
8.
Do not attempt to service this unit yourself. Removal of the monitor cover may
expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
9.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel in the event that:
–
Liquid is spilled into the product or the product is exposed to rain or water.
