Siemens ACUSON Antares, Инструкция по эксплуатации

Страница: 99 / 230

3 S y s t e m C o n t r o l s
[ 1 ] I N S T R U C T I O N S F O R U S E
3 - 27
Menu
Selection Tool Tip Description Settings
Persist Persistence Increasing Persistence creates a visible smoothing
effect by maintaining lines of image data for each
frame of imaging. A higher setting includes more
previous frames in the image data.
Dependent on
transducer and
exam type
Maps Maps
Selects a processing curve that assigns echo
amplitudes to gray levels.
A, B, C, D, E, F,
G, H, I
Tint Tint Changes the color of the image by adding blue, red,
yellow, or green to the gray in a gray map.
0 to 15
ClarifyVE ClarifyVE On/Off For systems installed with the Clarify vascular
enhancement (VE) technology option:
Activates Clarify VE.
---
(current
setting)
ClarifyVE Levels For systems installed with the Clarify VE option:
When Clarify VE is active, selects the level of flow
information to add to the image.
1 to 7
SieClear SieClear Activates SieClear multi-view spatial compounding. Off , 1 to 4
TEQ Set TEQ Overall Gain
Set Saves a TEQ gain offset for the current 2D-mode
imaging feature. ---
Timer
1
StopWatch Activates or deactivates the on-screen Timer. The
Timer displays the time elapsed since the timer was
started.
Off , On
Trig
1
Trigger
When enabled, limits the frame rate to the selected
maximum value.
Note: This selection is not available during Doppler or
M-mode imaging.
Transducer-
dependent
Balance
2
Balance Key
(CA/2D) Optimizes the image when using the ADI or CPS
imaging technique.
CA (Contrast
Agent only)
2D (2D-mode
only)
(current
setting) Imaging
Sequence
1
Sets the imaging technique used during CCAI
imaging:
Note: AEI-High MI and ECI-Low MI are available for
the C5-2 transducer only.
ADI
2
CPS
2
AEI-High MI
ECI-Low MI
Burst FR
1
Burst Duration
(Frames) Sets the frame rate to be used during the Burst
process. The frame rate determines the duration of
the Burst process.
1, 3, 5, 7, 10, 15,
20, 30, 50
Start
Burst
1
Start Burst
Initiates the Burst process during CCAI imaging.
---
1
For systems installed with the Cadence Contrast Agent Imaging (CCAI) option and/or the
Cadence Contrast Pulse Sequencing (CPS) option
2
For systems installed with the the Cadence Contrast Pulse Sequencing (CPS) option