Siemens ACUSON Antares, Инструкция по эксплуатации

Страница: 134 / 230

3 S y s t e m C o n t r o l s
3 - 62
[ 1 ] I N S T R U C T I O N S F O R U S E
Camera Tab
You can override the default printer selected in system presets by selecting
from available printers on the
Camera
tab. You can also select film size.
Filming Shortcut Menus
The Filming screen displays a shortcut menu when you press the
NEXT
key
on the control panel. The shortcut menu displayed depends on the location
of the trackball pointer.
Shortcut Menu Displayed Location of the Trackball Pointer
Film Job Management Selections Outside the gray border of the image page.
Image Management Selections Inside of the gray border of the image page, after image selection.
Film Job Management Selections
Selection Function
Expose Film Sheet
Immediately sends the images on the selected film sheet to the selected
printer.
Repack Reorganizes all images in the current film job or the selected film sheet (page)
to fill all empty positions, if any exist.
Example: The film job has two pages with five images. The layout is 4:1 (four
images per page). An image is deleted from the lower right of the first page
(film sheet), resulting in an empty position.
Repack reorganizes all images in
the film job, placing the image from the second page onto the first page and
deleting the second page.
Note: This selection is not available when image(s) are selected.
Expose Film Job Immediately sends all images in the film job to the selected printer.
Properties... Displays the Film Properties dialog box.
Image Management Selections
Selection Function
Cut
Removes the selected image(s) from the film job and places the image(s) onto
the clipboard.
Copy Places the image(s) onto the clipboard.
Paste Copies the image(s) from the clipboard onto the selected position of the film
sheet.
Select Series Selects all images of the series object that contains the selected image. For
example, if the selected image is the second image in a four-image series
object, then the system selects all four images in the series object.
Select On Succeeding Selects images of the series object that contains the selected image, starting
with the selected image and ending with the last image in the series object. For
example, if the selected image is the second image in a four-image series
object, then the system selects the second, third, and fourth images only.
Clear Document(s) Removes the selected image(s) from the film job.
Properties... Displays the Film Properties dialog box.