Siemens ACUSON Antares, Инструкция по эксплуатации

Страница: 130 / 230

3 S y s t e m C o n t r o l s
3 - 58
[ 1 ] I N S T R U C T I O N S F O R U S E
3-Scape Editing Group Box (Option)
Use the Editing group box to define an area within the volume to be
removed. The system removes displayed data only (2D-mode and/or
Power mode data).
Note:
The system dithers the
Editing Menu
selections and the
Rotate
selection from the
3-Scape Parameter menu while the volume is automatically rotating.
Menu
Selection Tool
Tip Description
Volume of Interest Defines content of the volume (volume of interest).
Polygon Defines an irregular area from a drawn outline and then removes all the
voxels inside or outside of that area.
Trace Defines an area from a free-form drawn outline and then removes all the
voxels inside or outside that area.
Parallel Cut Selects a plane (layer) within the volume and then removes all the voxels
outside the selected plane.
Note: This selection is not available when VOI is enabled.
Niche Removes all the voxels from the nearest corner of the volume to a
selected depth inside the volume.
Note: This selection is not available when VOI is enabled.
Large Eraser Displays the large eraser cursor for editing.
Small Eraser Displays the small eraser cursor for editing.
Undo
Last Edit Undo Last Edit Removes the most recent edit. You can repeatedly select
Undo Last Edit to sequentially remove several previous edits.
Undo All
Edits Undo All Edits Removes all edits.