manualshive.com logo in svg

Siemens 6GK5204-0BA00-2KB2, Руководство по эксплуатации, Страница: 75 / 176

Поделиться
Скачать
Siemens 6GK5204-0BA00-2KB2 Скачать руководство пользователя страница 75

 Power supply 100 AC .. 240 V / 24 .. 250 VDC

WARNING

Danger from line voltage

The SCALANCE X204RNA EEC has a power supply of 100 to 240 VAC or 24 to 250 VDC.

This product can only function correctly and safely if it is transported, stored, set up, and 
installed correctly, and operated and maintained as recommended.

Connecting and disconnecting may only be performed by an electrical specialist. Connect or 
disconnect power supply cables only when the power is turned off.

WARNING

The SCALANCE X204RNA EEC does not have an ATEX approval.

Devices with a 100 to 240 VAC or 24 to 250 VDC power supply are not approved for use in 
hazardous areas according to EC‑RL‑-94/9 (ATEX).

NOTICE
Securing cables with dangerous voltage

Make sure that the connector cannot be released accidentally by pulling on the connecting 
cable. Lay the cables in cable ducts or cable channels and secure the cables, where necessary, 
with cable ties.

Protective ground

WARNING

PE connector of SCALANCE X204RNA EEC

Simple grounding via the housing is inadequate. For reliable operation, the PE cable must be 
connected via the ground bolt. On the SCALANCE X204RNA EEC, the grounding bolt is on the 
bottom of the device.

Connecting up

7.2 Power supply

SCALANCE X-200RNA
Operating Instructions, 04/2022, C79000-G8976-C342-07

75

Содержание 6GK5204-0BA00-2KB2

















































































































































































Отзывы:

Нет отзывов