Siemens 6GK5204-0BA00-2KB2 Скачать руководство пользователя страница 33

Страница: 33 / 176

5.2

Product overview

Article numbers of the IE switches SCALANCE X-200RNA

The IE switches SCALANCE X-200RNA are available in different versions. These are listed in the
table below for a better overview:

Device

Article number

Supported modes

SCALANCE X204RNA (PRP)

6GK5204-0BA00-2KB2

PRP ↔ standard Ethernet
PRP ↔ HSR link

SCALANCE X204RNA (HSR)

6GK5204-0BA00-2MB2

HSR ↔ standard Ethernet;
HSR ↔ PRP link

SCALANCE X204RNA EEC (PRP)

6GK5204-0BS00-3LA3

PRP ↔ standard Ethernet

SCALANCE X204RNA EEC (HSR)

6GK5204-0BS00-2NA3

HSR ↔ standard Ethernet;
HSR ↔ PRP link

SCALANCE X204RNA EEC (PRP/
HSR)

6GK5204-0BS00-3PA3

PRP ↔ standard Ethernet;
HSR ↔ standard Ethernet;
HSR ↔ PRP link

Unpacking and checking

WARNING

Do not use any parts that show evidence of damage

If you use damaged parts, there is no guarantee that the device will function according to the
specification.

If you use damaged parts, this can lead to the following problems:
• Injury to persons
• Loss of the approvals
• Violation of the EMC regulations
• Damage to the device and other components

Use only undamaged parts.

1. Make sure that the package is complete.

2. Check all the parts for transport damage.

Scope of delivery

The following components are supplied with the SCALANCE X204RNA:

• SCALANCE X204RNA device

• 2-pin plug-in terminal block (signaling contact)

• 4-pin plug-in terminal block (redundant power supply)

Device description

5.2 Product overview

SCALANCE X-200RNA
Operating Instructions, 04/2022, C79000-G8976-C342-07

Содержание 6GK5204-0BA00-2KB2

















































































































































































Результаты поиска

Содержание 6GK5204-0BA00-2KB2

Отзывы:

Siemens 6GK5204-0BA00-2KB2, Руководство по эксплуатации, Страница: 33 / 176

Результаты поиска

Содержание 6GK5204-0BA00-2KB2

Отзывы: