Siemens 6GK5204-0BA00-2KB2, Руководство по эксплуатации, Страница: 145 / 176

If you click on an entry in the "Port" column, the "Packet Error Statistic Graphic" is displayed for
the selected port. You then see a configurable graphical representation of the counter value.
Graphic representation of the statistics
This dialog box displays the number of bad frames graphically. The display is dependent on the
cause of the error. There is a separate element in the graphic for each of the following causes of
error:
• "Bad Frames"
• "CRC"
• "Undersize"
• "Oversize"
• "Dropped L2"
Figure 9-47 Packet Error Statistic Graphic
With the check box in the "Packet Error" column, you decide the content of the graphic. The value
in the "Packets" column in the graphic is only displayed for a certain packet type if the appropriate
check box is selected. The "Percentage" column shows the errors of a certain type as a
percentage of the total errors for this port. When the percentage is calculated, error types are
included only if their check boxes are selected.
With the "Previous Port" and "Next Port" buttons, you can change to the display of the previous
or next port.
Functional description and configuration using Web Based Management
9.10 The "Switch" menu
SCALANCE X-200RNA
Operating Instructions, 04/2022, C79000-G8976-C342-07
145