manualshive.com logo in svg

Siemens 300 Series, Руководство пользователя, Страница: 94 / 197

Поделиться
Скачать
Siemens 300 Series Скачать руководство пользователя страница 94

3–30

ROLMphone 300/600 User Guide

One-Way Speaker Call

The One-Way Speaker Call feature lets you make a 
one-way call to the speaker of another phone. If the 
other party does not have a speakerphone, they must 
pick up the handset to answer.

Note

One-Way Speaker Call is only available on CBX 
Release 9006.3 and higher.

To make a one-
way speaker call 

➩

Press the One-Way Speaker Call (SPK1WAY) 
key.

➩

Dial the extension.

You will hear the confirmation tone. The other 
party will hear a double beep.

OR

➩

Get a dial tone.

➩

Dial # 8 1.

You will hear the confirmation tone, followed 
by a dial tone.

➩

Dial the extension.

You will hear a confirmation tone. The other 
party will hear a double beep.

➩

Begin speaking. The other party must pick up 
the handset to answer and will hear single beeps 
periodically until they do or until you hang up.

Содержание 300 Series






































































































































































































Отзывы:

Нет отзывов