manualshive.com logo in svg

Siemens 300 Series, Руководство пользователя, Страница: 128 / 197

Поделиться
Скачать
Siemens 300 Series Скачать руководство пользователя страница 128

5–12

ROLMphone 300/600 User Guide

Park

Park lets you move a call to an extension and hold it 
there, without ringing that extension. You or another 
party can then retrieve the call from the extension as 
needed.

Park is used in connection with the Park access code 
(* 6), which you can dial directly or by pressing a rep-
dial key set up for it.

To park a call to 
another exten-
sion

➩

Press the TRANSFR key. 

You will hear the confirmation tone, followed 
by the dial tone.

➩

Dial * 6.

➩

Dial the extension where you want to park the 
call. 

You will hear the confirmation tone. If you 
have a display phone, PARKED will be dis-
played.

➩

Hang up.

Note

If the extension is busy, the call will be queued 
to that extension. The party at the extension will 
hear an alerting tone.

If the extension is busy and in Privacy mode, 
the call cannot be parked to it. 

If the call cannot be parked to that extension, 
you will hear an error tone. If you have a display 
phone, NOT POSSIBLE will be displayed. To 
retrieve the call, press the CONNECT key.

Содержание 300 Series






































































































































































































Отзывы:

Нет отзывов