Siemens 300 Series Скачать руководство пользователя страница 74

Страница: 74 / 197

3–10

ROLMphone 300/600 User Guide

To remove the
last party from
the conference

➩

Press the CLEAR key.

➩

Press the TRANSFR key. The status light
beside the Conference (CONF) key blinks.

➩

Dial * * * 4.

You will hear the confirmation tone.

➩

Press the CONF key to rejoin the conference.
The number of parties and your position in the
conference is displayed.

To determine
your position in
the conference
(with a display
telephone)

➩

Press the TRANSFR key. The status light
beside the Conference (CONF) key blinks.

➩

Press the CONF key to rejoin the conference.

You will hear the conference tone. The number
of parties and your position in the conference is
displayed.

To remove a
party from the
conference

➩

Press TRANSFR and dial * * 4. The status light
beside the Conference (CONF) key blinks.

➩

Dial the number for the position in the confer-
ence of the party you want to drop (1-8).

You will hear the confirmation tone.

➩

Press the CONF key to rejoin the conference.

You will hear the conference tone. The number
of parties and your position in the conference is
displayed.

Содержание 300 Series






































































































































































































Результаты поиска

Содержание 300 Series

Отзывы:

Siemens 300 Series, Руководство пользователя, Страница: 74 / 197

Результаты поиска

Содержание 300 Series

Отзывы: