Siemens 300 Series Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 197

Siemens 300 Series Скачать руководство пользователя страница 27

Introduction

1–13

1. Int

rod
uction

Key Pad

Use the key pad on your telephone just as you would
any standard telephone key pad for dialing telephone
numbers. You can also use your key pad to access sys-
tem features available to your telephone for which
you do not have feature keys. See “Feature Access
Codes” on page 1–17 for more information.

Display

The display at the top of the RP312L, RP612L,
RP612SL, RP624L, and RP624SL models provides
call information such as the extension calling you and,
if configured to do so, the caller’s name. It also lets
you scroll through messages and notifications waiting
in your mailbox and provides information you’ll find
useful as you set up and use Siemens Rolm features.
Some features work differently on display telephones
from the way they do on non-display telephones. The
feature descriptions in Chapters 2 through 7 explain
these differences.

The RP312L, RP612L, RP612SL, RP624L and
RP624SL models all have two-line displays with up
to 24 characters per line. Each extension in your sys-
tem can have a 16-character name associated with it,
which is shown on the display.

On CBX Release 6.3 and higher, the elapsed time of
an incoming or outgoing external call is displayed.

«
...
25
26
27
28
29
...
»

Содержание 300 Series






































































































































































































Отзывы:

Нет отзывов