Siemens 300 Series Скачать руководство пользователя страница 89

Страница: 89 / 197

Making Calls

3–25

3. Making

alls

➩

If you want to set up another R- key, press the
STORE key. If you have a display telephone,
STORED is displayed. Repeat the two previous
steps.

➩

To end setup, press the PROGRAM key. The
PROGRAM status light turns off. If you have a
display telephone, STORED is displayed.

➩

On your faceplate, use a pencil to label each
R- key you changed with the name of the
feature or person it dials.

To clear a
repdial key on a
display
telephone

➩

Press the PROGRAM key. The PROGRAM
status light turns on. PRESS FEATURE KEY
OR DIAL CODE is displayed.

➩

Press the repdial (R-) key you want to clear.
REPDIAL is displayed, followed by the dialing
sequence.

➩

Before NEW NUMBER? is displayed, press the
CLEAR key. DELETED is then displayed.

➩

To clear another R- key, press the STORE key.
STORED is displayed. Repeat the two previous
steps.

➩

To end setup, press the PROGRAM key. The
PROGRAM status light turns off.

➩

On your faceplate, erase the label next to each
R- key you have cleared.

Note

You cannot clear a repdial key on a non-display
telephone or any telephone without a Clear key,
though you can set it up to dial a different sequence.

Содержание 300 Series






































































































































































































Результаты поиска

Содержание 300 Series

Отзывы:

Siemens 300 Series, Руководство пользователя, Страница: 89 / 197

Результаты поиска

Содержание 300 Series

Отзывы: