Siemens 1FT6 02 Series, Инструкция по эксплуатации

Страница: 15 / 112

ENGLISH
Siemens AG 610.43 410.21
15
Encoder system - incremental encoder sin/cos 1 V
PP
(I-2048)
- absolute value encoder EnDat
(A-2048, A-512)
- resolver
True running, coaxiality, axial run-out deviation Tolerance R (reduced)
(DIN 748-3, IEC 60072-1)
Vibration severity
Grade R (except 1FT6 108)
(EN 60034-14)
Shaft end
cylindrical with keyway and key;
(EN 60034-14) balancing with half key
Power plug
1FT6 02. to 1FT6 06. Outlet direction drive or non-drive end
1FT6 08. to 1FT6 10. Outlet direction drive or non-drive end or
at right angles right / left
Subsequent modification is not permitted
(1FT6 10. optional terminal box,
rotating through 90°)
4 Installation, Assembly
4.1 Transport, Storage
Use suitable lifting tackle for transport and assembly.
Use lifting eyes for transporting the motors where these are provided by the manufacturer.
Lifting tackle as per 98/37/EU Directive for Machines, appendix I.
The motors weigh up to 66 kg. For exact details, please refer to the catalog or dimensional
sheet.
Fig. 2 Lift and transport with suspension bands and lifting eyes
WARNING
Danger during lifting and transporting procedures!
Improper handling, unsuitable or defective devices, tools etc. can
cause injuries and/or property damage.
Lifting devices, ground conveyors and lifting tackle must correspond
to the valid regulations.