IV374E Rev.03
Installation and user manual
Date of issue : 2016-09-06
Page 15 of 63 + FR
(temperature and physical support means) .
WARNING!
UPON STARTING, PLEASE ENSURE THAT YOU ARE AWARE OF THE
LOCATION AND OPERATION OF THE EXTERNAL ISOLATORS WHICH ARE
CONNECTED TO THE UPS INPUT/BYPASS SUPPLY OF THE MAINS
DISTRIBUTION PANEL. CHECK TO SEE IF THESE SUPPLIES ARE
ELECTRICALLY ISOLATED, AND POST ANY NECESSARY WARNING SIGNS TO
PREVENT ANY INADVERTENT OPERATION
◆
For future expansion purpose, it is advisable to install power cable according to the full rating
capacity initially. The diameter of cables per each phase/pole is shown below:
UPS
cabinet
Cable Dimension
AC Input
(mm
2
)
AC Output
(mm
2
)
DC Input
(mm
2
)
Grounding
(mm
2
)
800
185*3
185*3
240*4
185*3
1280
240*4
240*4
240*6
240*4
CAUTION!
Protective earth cable: Connect each cabinet to the main ground system. For
Grounding connection, follow the shortest route possible .
WARNING!
FAILURE TO FOLLOW ADEQUATE EARTHING PROCEDURES MAY
RESULT IN ELECTROMAGNETIC INTERFERENCE OR IN HAZARDS
INVOLVING ELECTRIC SHOCK AND FIRE
3.8 Power cable connection
Before installing the equipment, it is necessary to verify the type of input source, that is, if there is
a single or a dual input. In case of dual input, verify the copper bars that connecting bypass and
mains input (rectifier) have been removed.
Once the equipment has been finally positioned and secured, connect the power cables as
described in the following procedure.
Verify the UPS is totally isolated from its external power source and also all power isolators of the
UPS are open. Check to see if they are electrically isolated, and post any necessary warning signs to
prevent their inadvertent operation.
Remove the distribution rear cover. Choose appropriate power cables (refer to the table above
reported) and pay attention to the diameter of the connection terminal of the cable that should be
greater than or equal to that of the connection poles;
Wiring
Содержание SAFEPOWER SPM
Страница 2: ......
Страница 65: ...IV374E Rev 03 Installation and user manual Date of issue 2016 09 6 Pag 63di 63 FR...