Siegmund 009950, Перевод оригинального руководства по эксплуатации

Страница: 13 / 16

Operating manual – Rotating table 5 Operation
13 / 15
5 Operation
5.1 Safety
Observe the following safety instructions:
−
The rotating table 009955 is mobile and can be moved on its castors. If the rotating table is to be moved to
a different installation location, observe the safety instructions in section 4.
−
Always position the rotating table on a level surface. After positioning, secure the rotating table using the
brakes to prevent it from rolling away.
−
Provide sufficient space at the installation location.
−
Visually inspect the rotating table before each use to ensure that it is in perfect working order.
– The rotating table must not be damaged and must not exhibit any significant corrosion. It must be fully
functional and in a technically flawless condition.
– The perforated plate must be securely attached.
Only authorised and trained persons are allowed to use the rotating table. They are responsible
for ensuring that the rotating table is used correctly and safely.
5.2 Raising and lowering rotating table
The rotating table is raised by turning the rotating unit/perforated plate counter clockwise until the desired height is
reached. Turning the upper part clockwise lowers the rotating table.
5.3 Mounting components
Components are best mounted on the perforated plate when the perforated plate is already set to the appropriate
working height. It is, however, possible to adjust the height later.
When the components come to rest on the perforated plate, they must be fixed in place using suitable clamping and
fastening elements.
Components, clamping and fastening elements can be mounted securely using the system holes in the perforated
plate. The clamping and fastening elements must be suitable for the components and their weight as well as for
attachment to the perforated plate. They must be able to fix the components in a stable position that prevents them
from tipping or slipping.
When mounting the components on the perforated plate, observe the following safety instructions:
−
The safety instructions in sections 4 and 5.1 apply when transporting the components.
−
Before components are mounted, the rotating table must be on a level surface and secured using the castor
brakes to prevent it from rolling away.
−
During mounting, all components on the perforated plate must be secured to prevent them from tipping over
and falling off.
−
Ensure that there is nobody in the danger area: Only those persons required for the activity are allowed to
remain at the rotating table.
6 Upkeep and maintenance
Upkeep and maintenance ensure that the rotating table is always safe to use.
6.1 Servicing
Rotating table at regular, e.g. monthly, intervals:
−
Check for damage, wear and corrosion.
−
Check that all connections are tight. Refasten loose connections as necessary. All components must be
mounted securely.
−
Replace any defective components.