manualshive.com logo in svg

Siegenia AEROPAC, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Siegenia AEROPAC Скачать руководство пользователя страница 21

Original operating instructions 

AEROPAC

07.2019

49

DEUTSC

H 

 

EN

GLISH

  FRAN

Ç

AIS 

 IT

ALIAN

O 

 NEDERL

ANDS 

 POL

SKI 

 РУССКИЙ

9.3 Cleaning the air canal

9.3.1 Removing the protective grid

•  If there is a build-up of dirt in the air canal of the unit, it must be cleaned.
•  To do this, it is necessary to remove the filter as well as the protective grid.
•  The cleaning of the air duct may only be carried out by specialist companies that are trained and 

practised in the maintenance and care of decentralised ventilation units.

Exposed electrical components.  
Risk of fatal injury from electric shock or fire.

›

  Before opening the unit, always unplug the mains plug from the socket (do not pull on the 

cable), in order to disconnect the unit from the mains.

›

  When a permanent mains connection is used, switch off the power to the unit.

1.  Press the two markings on the top of 

the front panel while  pulling the panel 
towards you. Pull out the front panel. 
At the point of resistance, keep on 
pulling until the panel is released from 
the fixing. Grip the bottom of the filter 
frame bar and remove the frame from 
the holder. (see Filter replacement, 
page 48).

2.  Insert a suitable flat screwdriver 

through the protective grid’s central 
opening into the horizontal slot of the 
locking mechanism on the rear panel 
of the unit, while pressing down the 
foam on the inside.

3.  Push the screwdriver into the locking 

mechanism until the fastening clip is 
released.

4.  Remove the protective grid from the 

guide.

5.  Carefully clean the air canal 

manually using a vacuum cleaner, for 
example.

1.

2.

3.

4.

Содержание AEROPAC





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды