![Siegenia AEROPAC Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/siegenia/aeropac/aeropac_original-operating-instructions_1265138015.webp)
Original operating instructions
AEROPAC
07.2019
43
DEUTSC
H
EN
GLISH
FRAN
Ç
AIS
IT
ALIAN
O
NEDERL
ANDS
POL
SKI
РУССКИЙ
6.10 AEROPAC Additional securing (optional)
The AEROPAC can be secured with an additional screw (not included in the scope of delivery),
e. g. if the unit is to be turned by 180° and mounted:
• Drilling additional mounting holes
with
a drilling template:
Remove the unit from the wall and perform steps 6.4 + 6.5 (see pages 36 + 37).
• Drilling additional mounting holes
without
a drilling template:
Check that the unit is secure and perform the following steps:
1. Press the two markings on the top of the front
panel while pulling the panel towards you.
Pull out the front panel until you feel some
resistance.
2. Grip the bottom of the filter frame bar and
remove the frame from the holder.
3. Fold back the insulating mat inside.
4. Use a pointed object such as a scriber to
pierce the recess (Ø 8 mm) in the rear panel
of the unit.
5. Detach the unit from the holder, drill the
additional hole for securing the unit (Ø
8 mm) and insert a suitable dowel (not
included in the scope of delivery).
6. Guide the unit over the two fixing screws
again and check that the unit is secure.
7. Insert a suitable screw through the recess (in
the rear panel of the unit) into the dowel
and tighten.
8. Reassemble the unit in the reverse order.
Содержание AEROPAC
Страница 27: ......