manualshive.com logo in svg

Siegenia AEROPAC, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Siegenia AEROPAC Скачать руководство пользователя страница 19

Original operating instructions 

AEROPAC

07.2019

47

DEUTSC

H 

 

EN

GLISH

  FRAN

Ç

AIS 

 IT

ALIAN

O 

 NEDERL

ANDS 

 POL

SKI 

 РУССКИЙ

9. Care and maintenance

Electrically operated unit. 
Risk of fatal injury from electric shock or fire. 

To prevent personal injury or damage to property, always comply with the 
following instructions:

›

  Pull the mains plug out of the socket prior to every cleaning process or maintenance work. 

Never pull at the cable to disconnect the device from the mains power supply.

›

  For all devices with a fixed connection to the 230 V AC mains power supply, switch off all poles 

of the feeder. The fuses may need to be removed.

9.1 Cleaning

Important:

 When cleaning the AEROPAC, do not allow liquids to get inside the unit.

•  Never use cleaning agents that are aggressive or contain solvents, or sharp-edged objects, as these 

may damage the surfaces of the casing.

•  Never clean the unit with a high-pressure cleaner or steam-jet cleaner.
•  Clean the AEROPAC with a cloth moistened with a mild soap solution or cleaning agent.
•  Always clean the G3 dust filter manually (e.g. with a vacuum cleaner, wash out using a grease-dis-

solving cleaning agent). Do not wash the filter in a washing machine!

Содержание AEROPAC





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды