SIEB & MEYER 036215, Руководство пользователя

Страница: 32 / 40

DIP switch Single-axis drive amplifier Double-axis drive amplifier: 16 Byte In
12 - - - - - -
13 Drive amplifier 7 - - -
14 - - - - - -
15 - - - - - -
16 - - - - - -
The following example shows the settings of the DIP switches for 4 double-axis drive
amplifiers and 4 single-axis drive amplifiers with 14 bytes input data:
DIP switch Single-axis drive amplifier Double-axis drive amplifier: 14 Byte In
1 - - - Drive amplifier 1, drive A
2 - - - Drive amplifier 1, drive B
3 - - - Drive amplifier 2, drive A
4 - - - Drive amplifier 2, drive B
5 - - - Drive amplifier 3, drive A
6 - - - Drive amplifier 3, drive B
7 - - - Drive amplifier 4, drive A
8 - - - Drive amplifier 4, drive B
9 Drive amplifier 4 - - -
10 - - - - - -
11 Drive amplifier 5 - - -
12 - - - - - -
13 Drive amplifier 6 - - -
14 - - - - - -
15 Drive amplifier 7 - - -
16 - - - - - -
The designations in and out refer to the viewpoint of the gateway. That
means, depending on the protocol the gateway receives 14 or 16 bytes from
the PLC (in) and sends always 16 bytes to the PLC (out).
6.2 Connector Pin Assignment
6.2.1 X2 – PROFIBUS slave Connection
9-pole female submin D connector
Pin I/O Name Meaning
1 Shield Cable shield
2 n.c. Ground
3 I/O RxD / TxD-P (B) Transmit/receive data (PROFIBUS)
4 O RTS Request to send
5 I/O GND Reference ground for bus termination
6 VCC5 5 V supply voltage for bus termination
7 n.c.
8 I/O RxD / TxD-N (A) Receive / transmit data (slave)
Connectors, Switches and Displays
W
32 Gateway 0362151A - PROFIBUS to SERVOLINK 4 Safety
6