SIEB & MEYER 036215, Руководство пользователя

Страница: 37 / 40

The LED STA1 indicates the status of the gateway.
LED Color Status Meaning Reaction
STA1 Red Flashes Start of firmware Wait until the LED stops
flashing.
Red/
green
Flashes No communication with the
fieldbus.
Establish the connection to the
fieldbus.
Green Flashes The parameters of the fieldbus
are loaded.
None
Green On Data exchange None
Red On Internal error Send the gateway to
SIEB & MEYER.
The LED STA2 indicates the status of the SERVOLINK 4 connection.
LED Color Status Meaning Reaction
STA2 Red/
green
Flashes There are not all the SL4
devices available that have been
parameterized on the fieldbus
side. Anyhow, the data
exchange is performed with the
available modules.
None
Green On The data exchange is performed
with all SL4 devices.
None
Green Flashes There are more SL4 devices
available than have been para‐
meterized on the fieldbus side.
Anyhow, the data exchange is
performed with the available
modules.
None
Red Flashes CRC error Send the gateway to
SIEB & MEYER.
Red On SL4 interrupted or CRC error in
all SL4 devices
Send the gateway to
SIEB & MEYER.
6.3.2 7-segment Display
The 7-segment display on the front panel shows
status, error and information messages as
code. The three-digit error and information
codes are displayed as sequence.
6.3.2.1 Status Messages
Code Description
0 OK
c Operating mode configuration: Select drives
c. Operating mode configuration: Save selection
6.3.2.2 Information Messages
Code Description
H.01. Speed zero monitoring has detected motor standstill.
W
Connectors, Switches and Displays
Gateway 0362151A - PROFIBUS to SERVOLINK 4 Safety 37
6