Sidekick SK-8RG, Руководство пользователя

Страница: 8 / 20

8
MAINTENANCE Cont.
Clean the reels as needed by soaking in a 50% solution of household bleach for 5
minutes. Rinse well with hot water.
ONCE A YEAR, open the unit (see SERVICE), unplug it first, and:
1. Protect the PC board from getting wet. Cover it with paper towels and a plastic sheet.
2. Examine for any signs of wetness.
3. Clean the heat tank and the area above the heat tank with a cloth dampened with a
toilet bowl cleaner.
4. Replace the air filter on the dryer with a 3” square of air conditioner filter.
5. Remove the protection for the PC board and push down on all the connectors.
6. Close up the unit.
ALARMS & MESSAGES DO NOT TURN UNIT OFF until you check why.
A continuous series of short buzzes signals that the unit requires attention. Read the
message in the display to find out what needs to be done.
“Check Dev, etc.” means that there is not enough solution for the processing to
continue. Push START to turn off the alarm. Fill the solution bottle and then push
START. The process will continue.
“Flush” means that the unit was not flushed after the last processing run. Push START to
allow unit to flush itself.
“No AC” means the unit is not plugged in. Plug the unit into a live wall outlet.
“Dump tank full”. Empty the DUMP bottle .
“Please turn off”. Turn unit off when not in use. There is nothing that needs warming up.
“Machine failure”. Self-diagnostic. See CORRECTING PROBLEMS .
HINTS
Test a new batch of chemistry on your own film or run a test strip.