Sidekick SK-8RG, Руководство пользователя

Страница: 10 / 20

10
PUSH PROCESSING.
If you want to change the developer time, hold
MINUS as you push START. The display will
show the developer time. Change to desired
time using the PLUS and MINUS. When the
proper time is displayed push START to begin.
The next time you process the unit will return
to the normal time.
As a rough guide, 1 stop is about:
a) + 2 min. for Slides E-6.
b) + 30 sec for color negs C-41.
c) + 20% of normal dev time for B/W
Call film manufacturer for more complete
information.
DISC PROCESSING (Optional)
Process disc with the normal COLOR NEG cycle. Use the Short Processing Drum.
Load the disc spindle with up to 18 discs. Push the retainer (round black plate with
stainless steel clip) on the end of the spindle to hold the discs together. Push on a
spindle extender (1” diameter 3” long plastic) and process normally.
DISC DRYING
When the processor says INSERT PLUG push the disc dryer assembly into the coupling
as if it was a normal processing DRUM. Insert the cord from the dryer into the fitting on
the right side of the processor.
Place the spindle in the dryer. The spindle end with a groove in it pushes into the dryer
motor coupling. Put the lid on the dryer. Push START and the discs will dry as the unit
flushes itself.
B/W PROCESSING TIMES with
TMAX Developer at 75
o
F (23.9
o
C).
Select “Tri X / Plus X” and PUSH.
FILM Time Push 1 Stop
Agfa 201 440-2500
APX 25 4:15 5:15
APX 100 4:15 5:15
AP 400 4:50 5:45
Fuji 800 788-3854
Neopan SS 4:15 5:30
Neopan 400 4:40 5:50
Neopan 1600 3:30 4:40
Ilford 201 265-6000
HP5 PLUS 4:30 5:30
100 DELTA 4:30 5:30
400 DELTA 5:00 6:00
FP4 PLUS 3:30 4:10
PANF Not recommended
Kodak 800 242-2424
PAN-X 4:40 5:40
PLUS-X 4:40 5:40
TRI-X 4:40 5:40
TMAX 100 5:30 6:35
TMAX 400 5:30 6:35
Select TMAX 3200 @85
o
F
TMAX 3200
@85
o
F
5:45 6:55