"
!
/
§
$
$
%
&
(
¼ L
¾ L
Figure 47: Mounting the miniTwin4 with C-Fix bracket and L-Fix bracket
5.
Mount the C-Fix bracket (
§
) at the other end of the twin stick.
For devices with a protective field height of
≥
360
mm, we recommend also using
an additional C-Fix bracket in the direct vicinity of the L-Fix bracket if there are
strong cross forces on the housing.
6.
Insert the twin stick into the C-Fix bracket and press it downward gently (
$
).
7.
Turn the twin stick to the rear until it engages in the C-Fix bracket (
%
).
8.
Turn the twin stick downwards until it is correctly positioned in the L-Fix bracket
(
&
).
9.
Tighten the M3 screws of the L-Fix bracket (
/
) with a torque of about 1.5
Nm.
10. To secure the twin stick (
), tighten the M3 screws of the C-Fix bracket with a
torque of approx. 1.5
(
Nm.
5.4.7
Mounting with C-Fix-Flex bracket
Overview
The C-Fix-Flex bracket can be positioned very flexibly on the twin stick. It does not
extend the dimensions of the miniTwin4 safety light curtain.
With the C-Fix-Flex bracket, twin sticks can be mounted until they make contact or at
right angles to each other without harming the resolution at the junction points.
With the C-Fix-Flex bracket, twin sticks can be mounted so that the protective field is
either parallel or perpendicular to the mounting surface. The C-Fix-Flex bracket makes it
possible to correct the mounting bracket by ± 4°.
5
MOUNTING
56
O P E R A T I N G I N S T R U C T I O N S | miniTwin4
8012624/10OM/2018-08-09 | SICK
Subject to change without notice
