Technical specifications
94
© SICK AG · Germany · All rights reserved · Subject to change without notice
8012471/ZN27/2017-06-09
Operating Instructions
LMS1xx Laser Measurement Sensors
Chapter
10
Electrical connection
LMS10x
LMS12x Security
LMC12x VdS
Removable system connector with
2 screw terminal blocks
1 x M12 round plug-in connector
1 x M8 round plug-in connector
LMS11x/LMS15x
LMS13x/LMS14x Security
LMC13x VdS
4 x M12 round plug-in connectors
1 x M8 round plug-in connector
Technical specifications, screw terminals
Cross-section of rigid cores
(American Wire Gauge — AWG)
0.14 mm²
(approx.
26 AWG)
1.5 mm²
(approx.
16 AWG)
Cross-section of flexible cores
(American Wire Gauge — AWG)
0.14 mm²
(approx.
26 AWG)
1.0 mm²
(approx.
18 AWG)
Insulation stripping length for the cores
5 mm
Screw tightening torque
0.22 Nm
0.3 Nm
Cable lengths
For power supply Sensor at DC 24 V
With 1 mm² wire cross-section (approx. 18 AWG)
220 m
With 0.5 mm² wire cross-section (approx. 22 AWG)
110 m
With 0.25 mm² wire cross-section (approx. 24 AWG)
50 m
For power supply heating at DC 24 V
(all variants with heating except LMS14x Security)
With 1 mm² wire cross-section (approx. 18 AWG)
45 m
With 0.5 mm² wire cross-section (approx. 22 AWG)
20 m
With 0.25 mm² wire cross-section (approx. 24 AWG)
10 m
For power supply heating at DC 24 V
(LMS14x Security)
With 1 mm² wire cross-section (approx. 18 AWG)
24 m
With 0.5 mm² wire cross-section (approx. 22 AWG)
12 m
With 0.25 mm² wire cross-section (approx. 24 AWG)
6 m
For power supply sensor at DC 12 V (all variants)
With 1 mm² wire cross-section (approx. 18 AWG)
20 m
With 0.5 mm² wire cross-section (approx. 22 AWG)
10 m
With 0.25 mm² wire cross-section (approx. 24 AWG)
5 m
Switching inputs
Number
2
Input resistance on HIGH
2 k
Voltage for HIGH
11 V
24 V
30 V
Voltage for LOW
–30 V
0 V
5 V
Input capacity
15 nF
Static input current
6 mA
12 mA
15 mA
Minimum
Typical
Maximum
Tab. 38:
Data sheet LMS1xx/LMC1xx (cont.)
