manualshive.com logo in svg

SICK InspectorP631 C-mount, Руководство по эксплуатации, Страница: 42 / 76

Поделиться
Скачать
SICK InspectorP631 C-mount Скачать руководство пользователя страница 42

6.5.6

Wiring the digital outputs

The four IN/OUT 3 ... 6 switching digital outputs can be assigned independently of each
other with various functions for the output of the result status. If the allocated event
occurs in the analysis process, then the corresponding digital output is live after the
end of the trigger for the selected pulse duration.

Position of digital outputs

•

Male connector of the device (M12, 17-pin, A-coded)

•

Open end of the adapter cable (female connector, M12, 17-pin, A-coded/open
end)

•

CDB650-204 connection module

All digital outputs are each available at the individual positions.

NOTE

Provide an arc-suppression switch at the digital output if inductive load is present.

b

Attach a freewheeling diode directly to the load for this purpose.

NOTE

Capacitive loads on the digital outputs have an effect on the switch-on and switch-off
behavior. A maximum capacitance of 100 nF is the limit value.

Function assignment

NOTE

Control the digital outputs in the device with the API functions. In order to assign the
digital output functions, use an installed SensorApp which contains this function.

Wiring digital outputs via connection module

Connection mod‐
ules

Digital outputs

Reference

CDB650-204

IN/OUT 3 ... 6 (RES/OUT 1 ... 4)

see "Wiring digital outputs of
the device in the CDB650-204",
page 63

CDM420-0006

N/OUT 3 ... 4

see "Wiring digital outputs of
the device in the CDM420-0006",
page 73

6 

ELECTRICAL INSTALLATION

42

O P E R A T I N G   I N S T R U C T I O N S | InspectorP63x Flex C-mount and S-mount

8019946/1EJ6/2022-02 | SICK

Subject to change without notice

Содержание InspectorP631 C-mount













































































Отзывы:

Нет отзывов