manualshive.com logo in svg

SICK InspectorP631 C-mount, Руководство по эксплуатации, Страница: 39 / 76

Поделиться
Скачать
SICK InspectorP631 C-mount Скачать руководство пользователя страница 39

NOTE

The operating instructions of the connection modules contains detailed information
on mounting and electrical installation. The operating instructions are available as a
download on the product page of the connection module.

Connection module product page

•

www.sick.com/CDB

•

www.sick.com/CDM

6.5.2

Wiring the data interface

Wiring the Internet interface

1.

Connect the device to the Ethernet connection of the computer via the adapter
cable.

2.

Set up communication via the SICK AppManager software.

NOTE

The Ethernet interface of the device has an Auto-MDIX function. This automatically
adjusts the transmission speed as well as any necessary crossover connections.

Wiring the serial data interface

The maximum data transmission rate for the serial interface depends on the length of
cable and on the type of interface.

Table 6: Data transmission rates and recommended maximum lengths of cable

Interface

Data transmission rate

Distance to the target computer
(host)

NOTICE
Risk of damage to the internal interface modules!

If the serial data interfaces are wired incorrectly, then electronic components in the
device could get damaged.

■

Observe the information on wiring.

■

Carefully check the wiring prior to switching on the device.

NOTE

Control the serial data interface in the device with the API functions. In order to activate
the serial data interface, use an installed SensorApp which contains this function.

Wiring data interfaces via a connection module

Connection modules

Data interface

Reference

6.5.3

Wiring the CAN interface

NOTE

Control the CAN data interface in the device with the API functions. In order to activate
the CAN data interface, use an installed SensorApp which contains this function.

ELECTRICAL INSTALLATION 

6

8019946/1EJ6/2022-02 | SICK

O P E R A T I N G   I N S T R U C T I O N S | InspectorP63x Flex C-mount and S-mount

39

Subject to change without notice

Содержание InspectorP631 C-mount













































































Отзывы:

Нет отзывов