9
Troubleshooting
9.1
General faults, warnings, and errors
Possible faults and corrective actions are described in the table below for troubleshoot‐
ing. In the case of faults that cannot be rectified using the information below, please
contact SICK Service. To find your agency, see the final page of this document.
NOTE
To help us to resolve the matter quickly, please note down the details on the type label.
Situation
Error or fault
Mounting
■
Device poorly aligned to objects with codes (e.g. glare)
■
Incremental encoder (optional) incorrectly positioned
Electrical installation
■
Interfaces of the device incorrectly wired
Configuration
■
Functions not adapted to local conditions, e.g., parameters for
the data interface not set correctly
■
Device limits not observed, e.g., working range, aperture angle
■
Trigger source for read cycle not selected correctly
Operation
■
Device faults (hardware, software)
9.2
Displaying the status log
To display the status log, connect the SOPAS ET configuration software with the device
online.
1.
Connect the SOPAS ET configuration software to the device.
2.
Opening the device in the project tree:
SERVICE
>
SYSTEM STATUS
>
SYSTEM INFORMA‐
TION
tab.
9.3
Repairs
Repair work on the device may only be performed by qualified and authorized personnel
from SICK AG. Interruptions or modifications to the device by the customer will invalid‐
ate any warranty claims against SICK AG.
9.4
Returns
b
Only send in devices after consulting with SICK Service.
b
The device must be sent in the original packaging or an equivalent padded pack‐
aging.
NOTE
Optional memory card
•
Check whether there is a memory card in the card slot of the device. If yes, remove
the memory card from the faulty device in
de-energized state
.
•
Do not send in the memory card!
TROUBLESHOOTING
9
8024289/1E1C/2022-09-09 | SICK
O P E R A T I N G I N S T R U C T I O N S | GLS621
41
Subject to change without notice
