Important information
FLOWSIC30 · Operating Instructions · 8020999/173B/V1-4/2020-02 · © SICK Engineering GmbH
11
Su
bj
ec
t t
o
ch
an
ge
w
ith
ou
t n
ot
ice
1.3.6
Restrictions of use
▸
Refer to the type plate for the configuration of your FLOWSIC30.
▸
Check that the FLOWSIC30 is suitably equipped for your application (e.g. gas condi
-
tions).
1.4
Responsibility of user
▸
Only put the FLOWSIC30 into operation after reading the Operating Instructions.
▸
Observe all safety information.
▸
If anything is not clear: Please contact SICK Customer Service.
D
esignated users
The FLOWSIC30 may only be operated by skilled technicians who, based on their technical
training and knowledge as well as knowledge of the relevant regulations, can assess the
tasks given and recognize the hazards involved.
Correct use
▸
Only use the FLOWSIC30 as described in these Operating Instructions. The manufac
-
turer bears no responsibility for any other use.
▸
Do not carry out any work or repairs on the FLOWSIC30 not described in this manual.
▸
Do not remove, add or modify any components to or on the FLOWSIC30 unless
described and specified in the official manufacturer information.
Otherwise
– any warranty by the manufacturer becomes void,
– the device may become dangerous,
– the approval for use in potentially explosive atmospheres is no longer valid,
– the approval for use in lines pressurized above 0.5 bar (7.25 psi) bar is no longer
valid.
Special local conditions
▸
Follow all local laws, regulations and company-internal operating directives applicable at
the installation location.
Retention of documents
▸
Keep these Operating Instructions and all associated documents available for refer
-
ence.
▸
Pass the documents on to a new owner.
NOTICE:
Skilled persons are persons in accordance with DIN VDE 0105 or IEC 364, or
directly comparable standards.
These persons must have exact knowledge on hazards arising from operation,
e.g. through hot, toxic, explosive gases or gases under pressure, gas-liquid
mixtures or other media as well as adequate knowledge of the measuring
system gained through training.
