3
It is possible to define up to 8 functions in the “Function configuration” tab. Func‐
tions are links of two edge values or of function values already defined before. An
offset is added to the respective function value, for example to prevent the values
from becoming negative.
Links are:
“Width”: The width/distance between two edges
”Center”: The center point between two edges
“Sum”: The sum of the two edge or function values
”Subtract”: Subtraction of the two edge or function values
”Smallest”: The smallest of the two edge or function values
”Biggest”: The largest of the two edge or function values
7
OPERATION
24
O P E R A T I N G I N S T R U C T I O N S | AS30 Prime - Extended Field of View
8026955/2022-02-16
| SICK
Subject to change without notice
