Parameter
Type
Description
Access
OffsetX[RegionSelector]
int
Horizontal offset from the origin to the region of interest (in
pixels).
R(W)
OffsetY[RegionSelector]
int
Vertical offset from the origin to the region of interest (in
pixels).
R(W)
RegionMode[RegionSelector]
enum
Controls if the selected region of interest is active and stream‐
ing.
Values:
Off
On
R
ComponentEnable[RegionSelector][Com‐
ponentSelector]
bool
Controls if the selected component streaming is active.
RW
PixelFormat[RegionSelector][Component‐
Selector]
enum
Format of the pixels provided by the device.
Values:
Mono8
Coord3D_C8
Mono12p
Mono16
Coord3d_C16
Coord3D_C12p
Coord3D_AC16_Planar
R(W)
TestPattern[RegionSelector][Component‐
Selector]
enum
Selects the type of test pattern that is generated by the device
as image source.
Values:
Off
GreyHorizontalRampMoving
R(W)
RegionIDValue[RegionSelector]
int
The unique identifier value corresponding to the Region.
R
ComponentIDValue[ComponentSelector]
int
The unique identifier value corresponding to the selected
Component type.
R
1
According to GeniCam
™
SFNC, the
ExposureTime
parameter belongs to the
AcquisitionControl
category. Here it is moved to the
ImageFormat‐
Control
category because it is selected by the
RegionSelector
parameter.
Table 16: Image format control custom parameter
Parameter
Type
Description
Access
RegionDescription[RegionSelector]
String
Describes the usage of a specific region in the device.
R
16.2.4
Scan 3D control
Table 17: Scan 3D control standard SFNC selectors
Selector
Type
Description
Scan3dExtractionSelector
enum
Selects the 3DExtraction processing module to control (if mul‐
tiple ones are present).
Value:
Scan3dExtraction1
Scan3dCoordinateSelector[Scan3dEx‐
tractionSelector]
enum
Values:
CoordinateA
CoordinateB
CoordinateC
ANNEX
16
8026049//2021-04 | SICK
O P E R A T I N G I N S T R U C T I O N S | Ruler3000
101
Subject to change without notice
