SICE S 58 LL, Инструкция по эксплуатации

Страница: 83 / 256

- E
nGlISH
- Operator's manual 83
Mode
ALARM LED
(red)
Led
RX ON
(white)
Led
CABLE
(green)
DISPLAY Access
level
Notes
MANU-
ALMODE
Flashes
quickly when
automatisms
are requested;
otherwise off.
Flashes
upon ar-
rival of the
commands
On with
a steady
light if the
cable is
connected;
otherwise
it is off
Variable
messages
FINAL
USER
If there is no
display or if it is
faulty the automa-
tisms cannot be
used but only the
manual commands.
Blinks quickly
(until the
machine
turns off) as
soon as an
automatism is
asked for
Flashes
upon ar-
rival of the
commands
On with a
steady light
if the cable
is con-
nected;
otherwise
it is off
Variable
messages
FINAL
USER
If there are no
calibration data
the automatisms
cannot be used,
only the manual
controls can.
Flashes very
slowly (the
on/off cycle
lasts 2 s)
Off On with a
steady light
if the cable
is con-
nected;
otherwise
it is off
Variable
messages
or OFF
FINAL
USER
This signal will
appear only upon
start-up and
indicates that the
display is discon-
nected/defective
and at the same
time a dip switch is
set to on. Return the
dip switch to the off
position to continue
working even if only
in manual mode.
STOP-
MODE
on Off for at
least 20
seconds
then blinks
if com-
mands
continue
arriving
Remains in
the status
it had prior
to entering
in Stop
Mode
It displays
"STOP" for
at least 20
seconds
FINAL
USER
The stop button
was pressed (NOT
emergency).
Minimum duration
of 20 seconds but
will continue until
all commands are
released.
SERVICE
MODE
Flashes slowly Flashes
upon ar-
rival of the
commands
On with a
steady light
if the cable
is con-
nected;
otherwise
it is off
Variable
messages
Technical
service
person-
nel
This operating
mode includes
the global cor-
rection Setting
and Calibration
programmes.
FACTORY
MODE
Variable
status based
on the com-
mands given
Flashes
upon ar-
rival of the
commands
On with a
steady light
if the cable
is con-
nected;
otherwise it
is off
Variable
messages
Factory
person-
nel